Headlights
1. Turn the ignition key to position II.
2. The low beam headlights (daytime running
lights) illuminate automatically, except
when the light switch (1) is in position
For information on switching between high and low beams.
NOTE
Active Bending Lights: Turn the headlight
switch to position 0 to activate a daylight
sensor, which automatically switches the
low beams on or off, depending on ambient
light conditions. When driving in daylight,
the headlights will switch off and the daytime
running lights will come on. In darkness,
the daytime running lights will switch
off and the Active Bending Lights will switch
on.
Headlight pattern with the Active Bending Light function deactivated (left) and activated (right)
See also:
Function check
All indicator and warning symbols light up in ignition mode II or when the engine
is started. When the engine has started, all the symbols should go out except the
parking brake symsymbol, which o ...
Storing a channel
A total of 20 satellite channels can be stored;
10 channels each for Sirius 1 and 2.
• A long press on one of the number keys
stores the currently tuned channel on that
key.
• A short press on a ...
Top tether anchors
Child restraint anchorages
Your Volvo is equipped with child restraint top tether anchorages in the rear
seat. They are located on the rear parcel shelf.
Securing a child seat
1. Place the chil ...