See also:

Introduction
Collision Warning with Full Auto-brake and Pedestrian Detection is designed to assist the driver if there is a risk of a collision with a pedestrian, a vehicle ahead that is at a standstill or ...

Replacing the daytime running lightbulb (models with Active BendingLights only)
1. Remove the rubber cover over the bulb by pulling it off. 2. Turn the bulb holder counterclockwise and pull it out of the headlight housing. 3. Remove the connector from the bulb unit by pres ...

On/Off button
To activate the system: 1. Turn the ignition key to position I. NOTE If you switch off the ignition while the audio system is on, the system will be on when the ignition is switched on again. ...