Service position
Wiper blades in service position
The wiper blades must be in the vertical (service) position for replacement, washing or to lift them away from the windshield when e.g., removing ice or snow. To put them in this position:
1. While sitting in the driver's seat, close the driver's door.
2. Insert the remote key in the ignition slot
3. Put the ignition in mode II (see page 86).
4. With the remote key in the ignition slot1, put the ignition in mode 0.
5. Move the right steering wheel lever up and hold it for at least 1 second. The wipers will then move to the vertical (service) position on the windshield.
The wipers can be returned to the normal position by briefly switching on the ignition (or by starting the engine).
See also:
Six-cylinder turbo engine
The 3-litre, six-cylinder turbo engine is transversely mounted and very
compact. The engine delivers 285 horsepower and 400 Nm of torque, from low up to
high revs. The turbo-six provides a high le ...
Airbag decals
Airbag decal on the outside of both sun visors
Passenger's side airbag decal
WARNING
• Children must never be allowed in the
front passenger's seat.
• Occupants in the front passenger's seat ...
Brake fluid
Location of the brake fluid reservoir
Checking the level
The fluid reservoir is concealed under the round cover at the rear of the engine
compartment. The round cover must be removed first befor ...