Extra high beam
1. Remove the headlight housing from the vehicle (see page 306).
2. Remove the cover over the bulbs (see page 308).
3. Remove the bulb by turning it counterclockwise and pulling it straight out.
4. Remove the connector from the bulb.
5. Press the new bulb into the socket and turn it clockwise to put it in place. It can only be secured in one position.
6. Put the cover back into position and reinstall the headlight housing.
See also:
Visual indicator
The audio system’s display gives an overview
of the vehicle’s position in relation to a
detected object.
The marked sectors in the display indicate that
one or more of the sensors has detected ...
Courtesy lights/door step lighting
The courtesy lights/door step lighting switch
on/off automatically when one of the front
doors is opened/closed. ...
Roof loads
Using load carriers
Load carriers are available as Volvo accessories. Observe the following points
when in use:
To avoid damaging your vehicle and to achieve maximum safety when driving,
we ...