Low beam, Halogen
1. Remove the headlight housing from the vehicle (see page 306).
2. Remove the cover over the bulbs (see page 308).
3. Unplug the connector from the bulb.
4. Remove the bulb by pulling it straight out.
5. The guide lug on the new bulb should be straight up when the bulb is inserted into the holder and the bulb should snap into place.
6. Put the cover back into position and reinstall the headlight housing.
See also:
Front seats
1 - Lumbar support: turn the control for firmer or softer lumbar support.
2 - Front-rear adjustment: lift the bar and move the seat to the position of
your choice.
3 - Raise/lower front edge of ...
Child safety locks
Child safety locks – rear doors
The controls are located on the rear door
jambs. Use the remote control's key blade or a
screwdriver to adjust these controls.
A The rear doors can only be open ...
Methanol
Do not use gasolines containing methanol (methyl alcohol, wood alcohol). This
practice can result in vehicle performance deterioration and can damage critical
parts in the fuel system. Such damage ...