See also:

Brake fluid reservoir
The brake fluid should always be above the MIN mark on the side of the reservoir. Check, without removing the cap, that there is sufficient fluid in the reservoir. Fluid type: DOT 4+ boiling poi ...

Storing the position
The mirror positions are stored in the key memory when the vehicle has been locked with the remote key. When the vehicle is unlocked with the same remote control the mirrors and the driver's s ...

Stage 2: Checking inflation pressure
1. Connect the tire sealing system as described in stage 1. 2. Refer to the inflation pressure table in this chapter for the correct inflation pressure. If the tire needs to be inflated, start ...