Switching to another device

It is possible to switch among paired Bluetooth devices that are in the vehicle. To do so:
1. Press MEDIA several times until Bluetooth is displayed, release the button and wait for several seconds or press OK/ MENU.
2. Be sure the external device's Bluetooth function is turned on and that the device is "discoverable." See the devices user's guide if necessary.
3. Press OK/MENU.
4. Turn TUNE to Change Bluetooth device and confirm by pressing OK/ MENU.
> After a short time, the external device's name will appear in the display. If other devices that have been paired are in range, their names will also be displayed.
5. Select the device to be connected by turning TUNE and pressing OK/MENU to confirm.
> The external device will be connected to the infotainment system.
Audio files can now be selected using the
buttons in the center console or on
the steering wheel keypad.
See also:
Activating the system
Before any phone voice commands can be
used, a Bluetooth®-enabled cell phone must
be paired with the infotainment system. If a
phone command is given, the system will
inform you If there is no ...
Wind blocker
The moonroof is equipped with a wind blocker that folds up when the moonroof
is open. ...
Introduction
The Park Assist Camera uses the display in the center console to show the area
behind the car while you are backing up.
PAC also shows guiding lines in the on-screen image to indicate the direction ...
