Selecting a channel
There are three ways of tuning in a channel:
- Using the left and right arrow keys to go to the next channel. Skipped channels (see page 220) will be excluded.
- By turning the TUNE control and selecting a channel from the list
- Through direct channel entry.
NOTE
- The numbers of skipped or locked channels will not be displayed.
- If a channel is locked, the access code must be entered before the channel can be selected. See "Unlocking a channel" on page 220.
See also:
Home safe and approach lighting
The light on the door mirrors comes on when
approach lighting or home safe lighting is
selected, see page 96. ...
Operation
Chassis settings
Use the buttons in the center console to change setting. The setting in use when
the engine is switched off is activated the next time the engine is started. ...
Replacing bulbs in the taillight cluster
1. Switch off all lights and turn ignition key to
position 0.
2. Fold down the lower section of the tailgate,
and fold up the rear section of the cargo
area floor.
3. If the vehicle is equipped ...