Introduction
The infotainment system in your vehicle is available in two versions:
High Performance Multimedia
- 7" color TFT display
- Voice control1
- Thumb wheel on the steering wheel keypad
- AM/FM/HD radio2
- Sirius satellite radio*
- CD/DVD (mp3 and wma file formats)
- AUX and USB sockets
- Bluetooth hands-free/streaming
- 8 speakers
- 4x40W amplifier
Premium Sound Multimedia
- 7" color TFT display
- Voice control1
- Thumb wheel on the steering wheel keypad
- AM/FM/HD radio2
- Sirius satellite radio*
- CD/DVD (mp3 and wma file formats)
- AUX and USB sockets
- Bluetooth hands-free/streaming
- 12 speakers
- 5x130W amplifier
Dolby Pro Logic
Dolby Surround Pro Logic II distributes stereo sound's two channels to the left/right and front/ rear speakers.
Dolby Pro Logic II and the symbol are trademarks of Dolby Laboratories Licensing Corporation. The Dolby Pro Logic II System is manufactured under license from Dolby Laboratories Licensing Corporation.
Audyssey MultEQ
The Audyssey MultEQ system has been used to optimize sound quality to help ensure a world-class listening experience.
Using the infotainment system
If the infotainment system is on when the ignition is switched off, it will come on automatically the next time the ignition is put in mode I or higher and continue using the same source (FM1, etc.) that was in use when the ignition was switched off (the driver's door must also be closed on vehicles with the optional keyless drive).
The infotainment system can be operated without a key in the ignition slot for 15 minutes at a time by pressing the On/Off button.
While the engine is being started, the infotainment system will be temporarily interrupted and will resume when the engine has started.
NOTE
To help avoid excessive battery drain, remove the remote key from the ignition slot if the infotainment system is used while the engine is switched off.
See also:
Vanity mirror lights
1. Carefully insert a
screwdriver and pry out
the lens.
2. Pry out the bulb and replace it.
3. Carefully press the lower edge of lens onto
the four tabs and press the upper edge of
the lens in ...
12-volt sockets
12-volt socket in the front tunnel console
The electrical sockets can be used for 12-volt accessories such as cell phone
chargers and coolers. For the socket to supply current, the ignition must ...
Extra high beam
1. Remove the headlight housing from the
vehicle (see page 322).
2. Remove the cover over the bulbs (see
page 323).
3. Disconnect the wiring connector from the
bulb holder.
4. Remove the bu ...