Switching BLIS on and off

Switching BLIS on and off - Blind Spot Information System* - Comfort and driving pleasure - Volvo S60 Owners Manual - Volvo S60

BLIS is automatically activated when the ignition is switched on. The indicator

BLIS is automatically activated when the ignition is switched on. The indicator lights will provide confirmation by flashing 3 times.

  • The system can be switched off by pressing the BLIS button in the center console (see the illustration). The indicator light in the button goes out when the system is switched off, and a text message is displayed.
  • BLIS can be switched on again by pressing the button. The indicator light in the button will illuminate and a new text message will be displayed. Press the READ button (see page 131) to erase the message.

Depending on the vehicle's optional equipment, there may not be space for the BLIS button in the center console. In this case, BLIS can be switched on and off in the menu system by pressing MY CAR and going to Settings Car settings BLIS. See page 134 for a description of the menu system.

See also:

Using the information button
1. Press the information button 2. All of the indicator lights will flash sequentially for approximately 7 seconds to indicate that the PCC is receiving information from the vehicle. If any of the ...

Ignition modes and electrical current to RSE
RSE can be activated with the ignition in modes I or II (and when the engine is running). See page 82 for detailed information about the various ignition modes. If a film is being played, it wi ...

The Federal Clean Air Act – U.S.
The Federal Clean Air Act requires vehicle manufacturers to furnish written instructions to the ultimate purchaser to assure the proper servicing and function of the components that control emissi ...