Deactivation
Move the gear selector from R to another position. There is a slight delay in the PAC system, which means that the view from behind the vehicle will remain on the screen for approximately 15 seconds after the gear selector has been moved from the R position or until the vehicle reaches a forward speed of 6 mph (10 km/h). The screen will then revert to the mode that it was in before R was selected and will, for example, display navigation system information.
NOTE
If any button on the center console control panel is pressed, the camera image will disappear from the display. Pressing CAM will return the camera image to the display.
See also:
Electrical system
General information
12 volt system with a voltage-regulated alternator. Single pole system in which
the chassis and engine block are used as conductors. The negative terminal is connected
to the ...
Touching up paintwork
Paint code on the model plate
Paint damage requires immediate attention to avoid rusting. Make it a habit to
check the finish regularly, for instance washing the vehicle. Touch-up if necessary.
...
Steep inclines and/or heavy loads
ACC is primarily intended for use on fairly level
roads. The system may have difficulty maintaining
the correct distance to a vehicle ahead
on steep inclines, if the vehicle is carrying a
heav ...