Function
Park assist button
The system is activated automatically when the vehicle is started. The indicator light in the button in the center console illuminates when the system is on.
- The front park assist system is active from the time the engine is started until the vehicle exceeds a speed of approximately 10 mph (15 km/h). It is also active when the vehicle is backing up.
- Rear park assist is active when the engine is running and reverse gear has been selected.
Activating/deactivating
The system is activated automatically when the vehicle is started.
Press the Park assist button on the center console to temporarily deactivate the system( s).
> The indicator light in the button will go out when the system has been deactivated.
Park assist will be automatically reactivated the next time the engine is started, or if the button is pressed (the indicator light in the button will illuminate).
NOTE
Park assist is disengaged automatically when the parking brake is applied.
See also:
Changing a wheel
Removing a wheel
Location of jack, towing eyelet1 and tools ...
Side marker lights
NOTE
Before starting to replace a bulb, see
page 322.
1. Remove the headlight housing from the
vehicle (see page 322).
2. Remove the bulb holder by turning it counterclockwise
and pulling i ...
Switching BLIS on and off
BLIS is automatically activated when the ignition
is switched on. The indicator lights will
provide confirmation by flashing 3 times.
• The system can be switched off by pressing
the BLIS butt ...