Setting a time interval

Setting a time interval - Operation - Distance Alert* - Comfort and driving pleasure - Volvo S60 Owners Manual - Volvo S60

Controls and display

Controls and display

3 - Time interval: Increase/decrease

6 - Time interval: On, while it is being set

7 - Time interval: On, after it has been set

Press to decrease it. to increase the interval or to decrease it.

Five different time intervals can be selected and are shown in the display as

Five different time intervals can be selected and are shown in the display as 1–5 horizontal bars. The greater the number of bars, the longer the time interval. One bar represents approximately 1 second to the vehicle ahead; 5 bars is approximately 2.5 seconds.

The number of bars indicating the selected time interval are shown while the

The number of bars indicating the selected time interval are shown while the setting is being made and for several seconds afterward. A smaller version of the symbol is then shown to the right in the display. The same symbol is displayed when Adaptive Cruise Control (ACC) is activated.

NOTE NOTE

  • The higher your vehicle’s speed, the greater the distance to the vehicle ahead, measured in feet (meters), for a given time interval.
  • The set time interval is also used by Adaptive Cruise Control, see page 157.

WARNING WARNING

Only use a time interval that is suitable in current traffic conditions.

    See also:

    Types of lists used in the manual
    Procedures Procedures (step-by-step instructions), or actions that must be carried out in a certain order, are arranged in numbered lists in this manual. 1 If there is a series of illustrations a ...

    Introduction
    The Driver Alert System is designed to help a driver who may be becoming fatigued or who is inadvertently leaving the lane. The Driver Alert System consists of two different functions that can be s ...

    Selecting a station (in wavebands AM/ FM1/FM2)
    Automatic tuning 1. Press RADIO. Continue pressing this button to toggle to the desired waveband (AM, FM1, etc.). 2. Release the button and wait several seconds or press OK/MENU. 3. Press the lef ...