Standby mode due to action by the driver
ACC is temporarily deactivated and put in standby mode:
- when the brakes are applied
- if the driver's seat belt is taken off
- If the driver's door is opened
- if the gear selector is moved to N
- if the accelerator pedal is depressed for more than 1 minute.
NOTE
If the accelerator pedal is only depressed for a short time, such as when passing another vehicle, ACC is deactivated temporarily and is reactivated when the pedal is released.
See also:
Turning off the accessory alarm sensors
In certain situations it may be desirable to turn off the accessory inclination
and movement alarm sensors if, for example, you drive your vehicle onto a ferry
where the rocking of the boat could ...
12-volt sockets
12-volt socket in the front tunnel console
12-volt socket in the rear center console
The electrical sockets can be used for 12-volt
accessories such as cell phone chargers and
coolers. For t ...
Child restraint systems
Child restraints
Infant seat
There are three main types of child restraint
systems: infant seats, convertible seats, and
booster cushions. They are classified according
to the child's age and s ...