Standby mode (temporary deactivation)
Press to temporarily deactivate cruise control (put it in standby mode). The set speed, for example 55 mph, is then shown in parentheses. The previously set speed and time interval are resumed by pressing .
WARNING
There may be a significant increase in speed after the button has been pressed.
When ACC is in active mode, the vehicle’s speed increases by approximately 1 mph (1 km/h) each additional time is pressed.
See also:
Pairing and connecting an external device
Before an external device can be connected, it
must be paired to the infotainment system. The
procedure for connecting an external device
varies, depending whether or not the device
has previo ...
Front fog lights
NOTE
Avoid touching the glass on the bulb with
your fingers.
1. Switch off the ignition.
2. Turn the bulb holder slightly counterclockwise
to release it.
3. Replace the bulb. The shape of the ...
Introduction
The HomeLink Wireless Control System provides
a convenient way to replace up to three
hand-held radio-frequency (RF) transmitters
used to activate devices such as gate operators,
garage door ...