Warning light—driver braking required
Adaptive Cruise Control can exert brake force that is equivalent to approximately 40% of the vehicle's total braking capacity. In situations requiring more brake force than ACC can provide and if the driver does not apply the brakes, an audible signal from the Collision Warning system will sound and warning light will illuminate (see page 174) in the windshield to alert the driver to react.
NOTE
Strong sunlight, reflections, extreme light contrasts, the use of sunglasses, or if the driver is not looking straight ahead may make the visual warning signal in the windshield difficult to see.
WARNING
Adaptive Cruise Control only warns of vehicles detected by the radar sensor, see page 160. In some cases there may be no warning or the warning may be delayed. The driver should always apply the brakes when necessary.
See also:
Tire designations
Federal law mandates that tire manufacturers place standardized information on
the sidewall of all tires (see the illustration).
The following information is listed on the tire sidewall:
The tire ...
Operation
Press the button in the center instrument panel to switch this function on or
off. The indicator light in the button illuminates when the function is on.
Depending on the optional equipment selec ...
Behind the wheel
Driving the XC70's turbocharged 3.0-liter V-6 took some getting used to. I
appreciated the surprisingly zippy kick-in-the-pants feel, as opposed to the
sluggishly heavy acceleration I anticipated ...