High/low beam headlights
Continuous high beams
1. Set the ignition to mode II.
2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high and low beams (this also applies on models equipped with the optional Active Bending Lights). > The symbol illuminates in the instrument panel to indicate that the high beams are on.
Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or .
Daytime running lights can be deactivated in the MY CAR menu system under Settings - Car settings - Light settings - Daytime running lights.
However, please be aware that these lights may not be deactivated in Canada.
NOTE
- The use of daytime running lights is mandatory in Canada.
- Continuous high beams cannot be activated when the headlight switch is in position . High beam flash will function in this position.
See also:
Buttons in the center console
...
Driver distraction
A driver has a responsibility to do everything
possible to ensure his or her own safety and
the safety of passengers in the vehicle and others
sharing the roadway. Avoiding distractions
is par ...
Active chassis (Four C)
Active chassis, Four-C (Continuously Controlled
Chassis Concept), regulates the characteristics
of the shock absorbers so that the
car's driving characteristics can be adjusted.
There are three ...