Seat with memory function
1 - Stored seat position
2 - Stored seat position
3 - Stored seat position
4 - Memory button
Programming the memory
Three different seating and door mirror positions can be stored in the driver seat's memory.
The following example explains how button (1) can be programmed. Buttons (2) and (3) are programmed in the same way.
To program (store) a seat position and door mirror position in button (1):
1. Move the seat (and door mirrors) to the desired position using the seat and mirror adjustment controls.
2. Press and hold down the memory button (4).
3. With the memory button depressed, press button (1) briefly to store the current position for the seat/mirrors.
To move the seat and mirrors to the position that they were in when a button was programmed:
Press and hold down button (1) until the seat and mirrors stop moving.
NOTE
As a safety precaution, the seat will stop automatically if the button is released before the seat has reached the preset position.
See also:
Home safe and approach lighting
The light on the door mirrors comes on when
approach lighting or home safe lighting is
selected, see page 96. ...
Belt check
Check the belt regularly to make sure it is in
good condition and is clean. A worn or dirty belt
can cause poor cooling and low alternator output
as well as impair the operation of the power
steer ...
Infant seats
Securing an infant seat with a seat belt
Do not place the infant seat in the front passenger's
sea
NOTE
Refer to page 48 and page 50 for information
on securing a child restraint using
ISOFIX/ ...