Folding the front seat backrest
The front passenger seat backrest can be folded to a horizontal position to make room for a long load. Fold the backrest as follows:
1 - Move the seat as far back and down as possible.
2 - Adjust the backrest to an upright position.
3 - Lift the catches on the rear of the backrest.
4 - Without releasing the catches, push the backrest forward.
Move the seat as far forward as possible so that the head restraint slides under the glove compartment.
WARNING
- When transporting long objects, cover sharp edges on the load to help prevent injury to occupants. Secure the load to help prevent shifting during sudden stops.
- When the seat's backrest is returned to the upright position, push and pull it to be sure that it is securely locked in this position.
See also:
Introduction
System overview
1 Cell phone
2 Location of the microphone
3 Center console control panel and display
Bluetooth® hands-free
This feature makes it possible to set up a wireless
connection betwee ...
Whiplash Protection System (WHIPS) – front seats only
The Whiplash Protection System (WHIPS) consists
of specially designed hinges and brackets
on the front seat backrests designed to help
absorb some of the energy generated in a collision
from the ...
Changing
WARNING
Connect and disconnect the positive and negative cables in the correct sequence.
Removal
Switch off the ignition, remove the remote key from the ignition slot and wait
at least 5 ...