See also:

Re-installing the wheel
1. Clean the contact surfaces on the wheel and hub. 2. Lift the wheel and place it on the hub. Tighten the lug nuts 3. Install the wheel nuts and tighten handtight. Using the lug wrench, tight ...

Setting a speed
Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...

Overview of Bluetooth® controls
Center console control panel 1 VOLUME: the buttons on the steering wheel keypad can be also be used. 2 Display 3 ENTER: press to answer an incoming call, make menu selections or activate the p ...