Reinserting the key blade in the remote key
1. Hold the remote key with the slot for the key blade up.
2. Carefully slide the key blade into its groove.
3. Gently press the key blade in the groove until it clicks into place.
See also:
Setting a speed
Once ACC has been put in standby mode, use
the or
buttons to store (set) the vehicle's
current speed. This puts the system in active
mode. The set speed, for example 55 mph, is
shown in th ...
Limitations
Strong sunlight, reflections, extreme light contrasts,
the use of sunglasses, or if the driver is
not looking straight ahead may make the visual
warning signal in the windshield difficult to see ...
Checking and adding oil
Location of the filler cap and dipstick
Volvo recommends Castrol oil products
NOTE
Before checking the oil:
The car should be parked on a level surface.
If the engine is warm, wait f ...