Turn signals
1. Remove the headlight housing from the vehicle (see page 322).
2. Remove the bulb holder by turning it counterclockwise and pulling it out of the headlight housing.
3. Pull out the holder to access the bulb.
4. Remove the burned out bulb by pressing it in slightly and turning it counterclockwise.
5. Press the new bulb into the holder and turn it clockwise.
6. Reinsert the bulb holder into the headlight housing and turn it clockwise.
7. Reinstall the headlight housing.
See also:
Anti-lock braking system (ABS)
The Anti-lock Braking System (ABS) helps to
improve vehicle control (stopping and steering)
during severe braking conditions by limiting
brake lockup. When the system "senses"
impend ...
Cargo area lighting
The cargo area lighting comes on automatically
when the tailgate is opened. ...
Fault tracing and actions
If the message Windscreen Sensors
blocked is displayed, this means that the camera
is obscured and cannot detect pedestrians,
vehicles or road marker lines in front of the
vehicle.
This, in t ...