High beam, Halogen
1. Remove the headlight housing from the vehicle (see page 322).
2. Remove the cover over the bulbs (see page 323).
3. Remove the bulb by turning it counterclockwise and pulling it straight out.
4. Remove the connector from the bulb.
5. Press the new bulb into the socket and turn it clockwise to put it in place. It can only be secured in one position.
6. Reinsert the bulb holder into the headlight housing.
7. Put the cover back into position and reinstall the headlight housing.
See also:
Electrical system
General information
12 volt system with a voltage-regulated alternator. Single pole system in which
the chassis and engine block are used as conductors. The negative terminal is connected
to the ...
Calling a contact
The dialogue below enables you to call the predefined contacts in your cell phone.
See the phone's user's guide if necessary.
The user initiates the dialogue by saying:
Phone > call con ...
Auxiliary sound level
If the external sound source's volume is too
high, the quality of the sound may be impaired.
This can be prevented by adjusting the external
sound source's input volume.
1. While playing the ...