Reinserting the headlight housing

Reinserting the headlight housing - Headlight housing - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owners Manual - Volvo XC60

When reinserting the housing, be sure that the

When reinserting the housing, be sure that the long locking pin (to the left in the illustration) is securely in place in both of its retaining clamps.

1. Plug in the connector until it clicks into place.

2. Reinstall the headlight housing and locking pins. Check that they are correctly inserted. The headlight housing must be properly inserted and secured in place before the lighting is switched on or the remote key is inserted into the ignition slot.

3. Check that the lights function properly.

The headlight wiring must be connected and the housing must be securely in place before the ignition is switched on.

    See also:

    Speed-dependent steering force
    Steering force increases with the speed of the vehicle to give the driver enhanced sensitivity. At low speed the vehicle is easy to steer in order to facilitate parking, etc. Steering force can ...

    A/C – ON/OFF
    When the indicator light in the button is on, the air conditioning is controlled automatically. This cools/heats and dehumidifies the incoming air. When the indicator light in the button i ...

    Airbag decals
    Airbag decal on the outside of both sun visors Passenger's side airbag decal WARNING • Children must never be allowed in the front passenger's seat. • Occupants in the front passenger's seat ...