Stage 2: Checking inflation pressure
1. Connect the tire sealing system as described in stage 1.
2. Refer to the inflation pressure table in this chapter for the correct inflation pressure. If the tire needs to be inflated, start the tire sealing system’s compressor. If necessary, release air from the tire by turning the air release knob counterclockwise.
CAUTION The compressor should not be used for more than 10 minutes at a time to avoid overheating.
WARNING
If you interrupt your trip for more than 1
hour, check the inflation pressure in the
damaged tire again before continuing.
See also:
Emergency stop
If the seat accidentally begins to move, press
one of the buttons to stop the seat.
WARNING
• Because the driver's seat can be
adjusted with the ignition off, children
should never be left una ...
Lighting panel
Overview, light switches
1 Thumb wheel for adjusting display and
instrument lighting
2 Rear fog light
3 Headlights/parking lights
Instrument lighting
Illumination of the display and instrumen ...
Warranty
As you'd expect, the Volvo V50 Sportswagon is supported by a comprehensive
warranty. The standard mechanical warranty is three years/60,000 miles
(whichever comes first), plus there's a three-year ...