Removing the ball holder
1. Remove the cotter pin from the locking bolt and slide the locking bolt out of the ball holder/hitch assembly.
2. Pull the ball holder out of the hitch assembly.
NOTE
A cover for the hitch assembly is also
included in the kit.
See also:
DSTC system
The Dynamic Stability and
Traction
Control system (DSTC) ...
Driving dynamics: chassis
The Volvo XC70 is equally adept at powering down muddy slopes, towing a boat
up a slippery ramp or cruising on the motorway. 'Here is a cross-country vehicle
that is extremely capable off-road yet ...
How can my vehicle fail OBD II emission inspection?
Your vehicle can fail OBD II emission inspection
for any of the following reasons.
• If your Check Engine (MIL) light is lit, your
vehicle may fail inspection.
• If your vehicle's Check Engine l ...