Search paths
Throughout this manual, search paths to the menu system functions are listed as shown in the following example: Audio settings Equalizer, if the following steps have been taken first:
1. Press the desired mode button, (RADIO, MEDIA, etc). Continue pressing the button to navigate through the various selections displayed (e.g., FM1). Release the button and wait several seconds to automatically accept the selection or turn TUNE and press OK/MENU.
2. Turn TUNE or use the thumb wheel on the steering wheel keypad to scroll to the desired menu selection, such as Audio settings, and press OK/MENU to confirm a selection.
3. Turn TUNE again to scroll to the desired submenu (e.g., Equalizer) where applicable and press OK/MENU.
See also:
Installing the wheel
1. Clean the contact surfaces on the wheel
and hub.
2. Lift the wheel and place it on the hub.
3. Install the wheel bolts and tighten handtight.
Using the lug wrench, tighten crosswise
until al ...
Day/Night mode
The screens can be set for three different lighting
conditions: Auto, Day or Night.
Press on the remote control and
change
the setting under Day/Night mode on the
screen. See also page 251 f ...
Putting ACC in standby mode
Before ACC can be used to regulate speed
and/or the distance to a vehicle ahead, it must
first be put in standby mode.
To do so:
Press .
The symbol appears in the display
and
parentheses ( ...