Deactivation
Move the gear selector from R to another position.
There is a slight delay in the PAC system, which means that the view from behind the vehicle will remain on the screen for approximately 15 seconds after the gear selector has been moved from the R position or until the vehicle reaches a forward speed of 6 mph (10 km/h). The screen will then revert to the mode that it was in before R was selected and will, for example, display navigation system information.
NOTE
If any button on the center console control
panel is pressed, the camera image will disappear
from the display. Pressing CAM will
return the camera image to the display.
See also:
Electronic climate control, ECC
Temperature control, driver's side
Heated driver's seat*
Defroster (maximum effect)
Blower
Manual air distribution—floor
Manual air distribution—dashboard air vents
Manual air ...
Operation
Chassis settings
Use the buttons in the center console to change setting. The setting in use when
the engine is switched off is activated the next time the engine is started. ...
Introduction
Your vehicle is equipped with tires according
to the vehicle's tire information placard on the
B-pillar (the structural member at the side of
the vehicle, at the rear of the driver's door
opening) ...