Activating DAC
Press MY CAR in the center instrument panel and go to Car settings Driver Alert and select On. See page 133 for more information on the menu system.
The function is activated when the vehicle exceeds a speed of 40 mph (65 km/h). The display will show level markings of 1–5 bars, where a low number of bars indicates erratic driving. A high number of bars indicates stable driving.
If the vehicle is being driven erratically, the driver will be alerted by an audible signal and the message Driver Alert, Time for a break is displayed. The warning will be repeated after a short time if the driving pattern remains the same.
WARNING
• An alert should be taken seriously since
it is sometimes difficult for a driver to
realize that he/she is fatigued.
• In the event of a warning or if the driver
feels fatigued, stop as soon as possible
in a safe place and rest.
See also:
CHANGE CODE
This function makes it possible to change the
channel access code. The default code is
0000.
To change the code:
1. Select CHANGE CODE and press
ENTER.
2. Enter the current code and press ENTE ...
RSE-AUX connectors and 12-voltsocket
The three color-coded (yellow-white-red) RSEAUX
connectors can be used to connect an
auxiliary device to the RSE system. Always follow
the connection instructions provided with
the auxiliary devic ...
Messages
Park brake not fully released – A fault is preventing
the parking brake from being released.
Try to apply the parking brake and release it
several times. If the problem persists, contact an aut ...