Setting a warning distance

Setting a warning distance  - Operation - Collision warning with Full Auto-brake and Pedestrian Detection - Comfort and driving pleasure - Volvo XC60 Owners Manual - Volvo XC60

This setting determines the distance at which the visual and audible warnings are triggered.

Select Long, Normal or Short by pressing MY CAR on the center console control panel and going to Settings Car settings Car settings Driver Driver support systems Collision Warning Collision Warning Warning distance. Warning distance.

The warning distance determines the level of sensitivity used by the system. The warning distance Long provides an earlier warning.

Begin by using Long and if the system gives too many warnings, try changing to Normal.

WARNING
• The setting Short should only be used in situations where traffic is light and moving at low speeds.
• Collision Warning alerts the driver to the risk of a collision but this function cannot reduce the driver’s reaction time.
• For Collision Warning to be as effective as possible, it is recommended that Distance Alert be set to 4 or 5, see page 164.

NOTE
• When Adaptive Cruise Control is used, the warning light and signal will be used by that function, even if the warnings provided by Collision Warning have been deactivated by the driver.
• In situations where traffic is moving at considerably different speeds, or if the vehicle ahead brakes suddenly, warnings may be considered to be late, even if the setting Long has been selected.

    See also:

    Hoisting the vehicle
    If a garage jack is used to lift the vehicle, the two jack attachments points should be used. They are specially reinforced to bear the weight of the vehicle. A garage jack can also be placed u ...

    Emergency Brake Assistance (EBA)
    The EBA function is designed to provide full brake effect immediately in the event of sudden, hard braking. The system is activated by the speed with which you depress the brake pedal. NOTE • Wh ...

    Setting a time interval
    Controls and display 3 - Time interval: Increase/decrease 6 - Time interval: On, while it is being set 7 - Time interval: On, after it has been set Press to increase the interval or to decrea ...