Function
Location of the laser sensor in the windshield
City Safety™ monitors traffic ahead of you using a laser sensor mounted in the upper section of the windshield. If a collision is imminent, City Safety™ will automatically apply the brakes, which may feel like hard braking.
If the difference in speed between your vehicle and the vehicle ahead is more than approximately 9 mph (15 km/h), City Safety™ alone cannot prevent a collision from taking place.
The driver must apply the brakes to help avoid a collision or reduce its effect.
When the function activates and applies the brakes, a message will appear in the information display to indicate that the system is/has been active.
NOTE
• When City Safety™ applies the brakes,
the brake lights will illuminate.
• In cases where City Safety™ has stopped
the vehicle, the system will then
release the brakes. The driver must
apply the brakes to keep the vehicle at
a standstill.
See also:
Jump starting
Connecting the jumper cables
Follow these instructions to jump start your vehicle's dead battery or to jump
start another vehicle's dead battery using your vehicle. If the 12-volt auxilia ...
Warning symbols on the battery
NOTE
A used battery should be disposed of in an
environmentally responsible manner. Consult
your Volvo retailer or take the battery to
a recycling station. ...
Turn signals
1. Remove the headlight housing from the vehicle (see page 306).
2. Remove the cover by pulling it straight out.
3. Pull the holder to access the bulb.
4. Press in the bulb and turn it to remove ...