Automatic standby mode
Adaptive cruise control is linked to other systems such as the stability and traction control system (DSTC). If this system is not functioning properly, adaptive cruise control is automatically deactivated and will go into standby mode.
In the event of automatic deactivation, an audible signal will sound and the message Cruise control Cancelled is shown in the display.
The driver must then intervene and adapt the vehicle's speed to the surrounding traffic and regulate the distance to the vehicle ahead.
An automatic switch to standby mode may be
caused if:
• the wheels lose traction
• brake temperature is high
• the radar sensor is obstructed by, for
example, wet snow or rain.
See also:
Reprogramming a Single HomeLinkButton
1. Press and hold the desired HomeLink button.
DO NOT release the button.
2. The indicator light will begin to flash after
20 seconds. Without releasing the Home-
Link button, proceed with “Pr ...
Fog on the inside of the windows
The defroster function should be used to
remove fog or mist from the inside of the windows.
Keeping the windows clean with a commercially
available window washing spray will
also help prevent f ...
Anti-lock brakes (ABS)
If the ABS warning lamp lights up there is a
malfunction in the ABS system (the standard
braking system will however function) and the
vehicle should be driven cautiously to a trained
and qualifie ...