Function check

Function check  - Indicator, information, and warning symbols - Instruments and controls - Your driving environment - Volvo XC60 Owners Manual - Volvo XC60

All indicator and warning symbols light up in ignition mode II or when the engine is started.

When the engine has started, all the symbols should go out except the parking brake symbol, which only goes out when the brake is disengaged.

If the engine does not start or if the function check is carried out in ignition mode II, all symbols go out after 5 seconds except the symbol for faults in the vehicle's emissions system and the symbol for low oil pressure.

Certain symbols may not have their functions illustrated, depending on the vehicle's equipment.

    See also:

    Reinserting the key blade in the remote key
    1. Hold the remote key with the slot for the key blade up. 2. Carefully slide the key blade into its groove. 3. Gently press the key blade in the groove until it clicks into place. ...

    Replacing high/low beams/turn signal/parking light bulbs
    WARNING • The engine should not be running when changing bulbs. • If the engine has been running just prior to replacing bulbs in the headlight housing, please keep in mind that components in th ...

    Operation
    Controls and display 1 Resume previous settings, increase speed (each additional press increases speed by 1 mph (approximately 2 km/h). 2 Standby mode on/off 3 Set time interval 4 Put in activ ...