See also:

Replacing the high beam bulb (halogenheadlights)
1. Remove the rubber cover by pulling it off. 2. Pull the connector from the lamp housing. 3. Loosen the bulb's retaining spring by first moving it to the right and then moving it out of the way ...

Polishing and waxing
• Normally, polishing is not required during the first year after delivery, however, waxing may be beneficial. • Before applying polish or wax the vehicle must be washed and dried. Tar spots ca ...

Emission inspection readiness
What is an Onboard Diagnostic System (OBD II)? OBD II is part of your vehicle's computerized engine management system. It stores diagnostic information about your vehicle's emission control ...